Architectural Sill-Height Convector - DBA & SHA Series

  • IDEAL SPACES | Residential (DBA): Living Rooms; Bedrooms; Other Similar Areas with Floor-to-Ceiling Windows
  • Institutional and Commercial (SHA or DBA): Offices; Hallways; Lobbies; Condos; Conference Rooms;
  • Retail Spaces; Other Similar Areas
  • COLORS | Neutral Gray; Charcoal Gray; Navajo White; Northern White; Statuary Bronze; Desert Tan; Black;
  • Custom Colors, Clear, Bronze Anodized Finishes Available  
  • DIMENSIONS | (DBA) 6" H x 3-5/8"D (Length varies)         
  • DIMENSIONS | (SHA) 7" H x 5-5/8"D (Length varies)
  • DBA Series is approved for residential applications
  • Patented "Stair-Step" SHA heating element design accommodates a multitude of applications and heating needs
  • Unique two-piece extruded aluminum “Snap-Lock” closure design secures the one-piece top and front grilles to the one-piece back and bottom providing a rapid, secure fit all along the length of the unit
  • Front/bottom inlet air grille utilizes slots which create an attractive installation where inlet grille is visible
  • Blend into any décor with custom paint and anodizing upon request
  • Units can be mounted on floor, wall, or pedestals
  • Customize space with wall-to-wall installation, or as discrete units in standard lengths of 28 in. to 10 ft.
  • Units are available in a wide range of heating capacities per foot length (see specifications)
  • Architectural-style end sections give a finished look when used as a stand-alone or where a wall-to-wall run is not desired
  • Inside and outside corners can be ordered factory-cut and mitered to fit difficult or unusual spaces
  • Right -or left-hand entry and built-in wire way (equivalent to 3/4 in. conduit) with factory-installed wiring
  • Full line of trim accessories, including matching blank sections, end caps, filler sections, inside and outside corners, diagonal end sections, and splice plates
  • Optional built-in controls include: line-voltage thermostat; two-stage thermostat; on/off switch; transformer relay; power relay and pneumatic/switch
  • Easy connection of supply wiring from bottom, rear or end, as well as multiple wiring of adjacent heaters from one entry point
  • Thermal limit switch with linear type (full length) sensing bulb provides constant protection against overheating from any cause
  • Switch will automatically reset when normal operating temperatures are restored
  • Discharge air openings in top grille are punched slots which are pencil-proof for safety
See more HeatersSee more QMark products

Additional Information

CATALOG NUMBER LENGTH WATTS PER FT. TOTAL WATTS AMPS 120V AMPS 208V AMPS 240V AMPS 277V AMPS 347V AMPS 600V SHIP WT.(lbs.)
DBA02 28”
(711mm)
100 200 1.7 1 0.8  
    125 250 2.1 1.2 1 0.9  
    150 300 2.5 1.4 1.3 1.1 8
    188 376 3.1 1.8 1.6 1.4  
    250 500 4.2 2.4 2.1 1.8 1.4  
DBA03 3’
(914mm)
100 300 2.5 1.4 1.3 1.1  
    125 375 3.1 1.8 1.6 1.4 1.1  
    150 450 3.8 2.2 1.9 1.6 1.3 10
    188 564 4.7 2.7 2.4 2 1.6  
    250 750 6.3 3.6 3.1 2.7 2.2  
DBA04 4’
(1219mm)
100 400 3.3 1.9 1.7 1.4 1.2  
    125 500 4 2 2 2 1  
    150 600 5 2.9 2.5 2.2 1.7 13
    188 752 6.3 3.6 3.1 2.7 2.2 1.3  
    250 1000 8.3 4.8 4.2 3.6 2.9 1.7  
DBA05 5’
(1524mm)
100 500 4.2 2.4 2.1 1.8 1.4 0.8  
    125 625 5.2 3 2.6 2.3 1.8 1  
    150 750 6.3 3.6 3.1 2.7 2.2 1.3 17
    188 940 7.8 4.5 3.9 3.4 2.7 1.6  
    250 1250 10.4 6 5.2 4.5 3.6 2.1  
DBA06 6’
(1829mm)
100 600 5 2.9 2.5 2.2 1.7 1  
    125 750 6.3 3.6 3.1 2.7 2.2 1.3  
    150 900 7.5 4.3 3.8 3.2 2.6 1.5 20
    188 1128 9.4 5.4 4.7 4.1 3.3 1.9  
    250 1500 12.5 7.2 6.3 5.4 4.3 2.5  
DBA07 7’
(2134mm)
100 700 3.4 2.9 2.5 2 1.2  
    125 875 4.2 3.6 3.2 2.5 1.5  
    150 1050 5 4.4 3.8 3 1.8 24
    188 1316 6.3 5.5 4.8 3.8 2.2  
    250 1750 8.4 7.3 6.3 5 2.9  
DBA08 8’
(2438mm)
100 800 3.8 3.3 2.9 2.3 1.3  
    125 1000 4.8 4.2 3.6 2.9 1.7  
    150 1200 5.8 5 4.3 3.5 2 27
    188 1504 7.2 6.3 5.4 4.3 2.5  
    250 2000 9.6 8.3 7.2 5.8 3.3  
DBA09 9’
(2743mm)
100 900 4.3 3.8 3.2 2.6 1.5  
    125 1125 5.4 4.7 4.1 3.2 1.9  
    150 1350 6.5 5.6 4.9 3.9 2.3 30
    188 1692 8.1 7.1 6.1 4.9 2.8  
    250 2250 10.8 9.4 8.1 6.5 3.8  
DBA10 10’
(3048mm)
100 1000 4.8 4.2 3.6 2.9 1.7  
    125 1250 6 5.2 4.5 3.6 2.1  
    150 1500 7.2 6.3 5.4 4.3 2.5 33
    188 1,880 9 8 7 5 3  
    250 2500 12 10.4 9 7.2 4.2  
NOTE:
1. Cabinet available up to 15' length. Custom length cabinets are priced with heater and blank to the next larger size.
2. Backs are provided standard with no finish. For finished backs, add 10% to List price.
3. Knockouts on back omitted by request only.
NOTE: All models are NON-STOCK made-to-order. When ordering, specify quantity, catalog number, voltage, wattage, optional controls, and color. Consult sales representative for lead times.
CATALOG NUMBER LENGTH WATTS PER FT. TOTAL WATTS AMPS 120V AMPS 208V AMPS 240V AMPS 277V AMPS 347V AMPS 600V SHIP WT.(lbs.)
SHA02 28”
(711mm)
100 200 1.7 1 0.8  
    125 250 2.1 1.2 1 0.9  
    150 300 2.5 1.4 1.3 1.1 8
    188 376 3.1 1.8 1.6 1.4  
    250 500 4.2 2.4 2.1 1.8 1.4  
SHA03 3’
(914mm)
100 300 2.5 1.4 1.3 1.1  
    125 375 3.1 1.8 1.6 1.4 1.1  
    150 450 3.8 2.2 1.9 1.6 1.3 10
    188 564 4.7 2.7 2.4 2 1.6  
    250 750 6.3 3.6 3.1 2.7 2.2  
SHA04 4’
(1219mm)
100 400 3.3 1.9 1.7 1.4 1.2  
    125 500 4.2 2.4 2.1 1.8 1.4  
    150 600 5 2.9 2.5 2.2 1.7 13
    188 752 6.3 3.6 3.1 2.7 2.2 1.3  
    250 1000 8.3 4.8 4.2 3.6 2.9 1.7  
SHA05 5’
(1524mm)
100 500 4.2 2.4 2.1 1.8 1.4 0.8  
    125 625 5.2 3 2.6 2.3 1.8 1  
    150 750 6.3 3.6 3.1 2.7 2.2 1.3 17
    188 940 7.8 4.5 3.9 3.4 2.7 1.6  
    250 1250 10.4 6 5.2 4.5 3.6 2.1  
SHA06 6’
(1829mm)
100 600 5 3 3 2 2 1  
    125 750 6.3 3.6 3.1 2.7 2.2 1.3  
    150 900 7.5 4.3 3.8 3.2 2.6 1.5 20
    188 1128 9.4 5.4 4.7 4.1 3.3 1.9  
    250 1500 12.5 7.2 6.3 5.4 4.3 2.5  
SHA07 7’
(2134mm)
100 700 3.4 2.9 2.5 2 1.2  
    125 875 4.2 3.6 3.2 2.5 1.5  
    150 1050 5 4.4 3.8 3 1.8 24
    188 1316 6.3 5.5 4.8 3.8 2.2  
    250 1750 8.4 7.3 6.3 5 2.9  
SHA08 8’
(2438mm)
100 800 3.8 3.3 2.9 2.3 1.3  
    125 1000 4.8 4.2 3.6 2.9 1.7  
    150 1200 5.8 5 4.3 3.5 2 27
    188 1504 7.2 6.3 5.4 4.3 2.5  
    250 2000 9.6 8.3 7.2 5.8 3.3  
SHA09 9’
(2743mm)
100 900 4.3 3.8 3.2 2.6 1.5  
    125 1125 5.4 4.7 4.1 3.2 1.9  
    150 1350 6.5 5.6 4.9 3.9 2.3 30
    188 1692 8.1 7.1 6.1 4.9 2.8  
    250 2250 10.8 9.4 8.1 6.5 3.8  
SHA10 10’
(3048mm)
100 1000 4.8 4.2 3.6 2.9 1.7  
    125 1250 6 5.2 4.5 3.6 2.1  
    150 1500 7.2 6.3 5.4 4.3 2.5 33
    188 1880 9 7.8 6.8 5.4 3.1  
    250 2500 12 10.4 9 7.2 4.2  
NOTE:
1. Cabinet available up to 12' length. Custom length cabinets are priced with heater and blank to the next larger size.
2. Backs are provided standard with no finish. For finished backs, add 10% to List price. 3. Knockouts on back omitted by request only.
NOTE: All models are NON-STOCK made-to-order. When ordering, specify quantity, catalog number, voltage, wattage, optional controls, and color. Consult sales representative for lead times.
CATALOG NUMBER LENGTH WATTS PER FT. TOTAL WATTS 208V 1 PHASE 208V 3 PHASE 240V 1 PHASE 240V 3 PHASE 277V 1 PHASE 347V 1 PHASE 600V 1 PHASE 600V 3 PHASE SHIP WT.(lbs.)
SHA02 28”
(711mm)
375 750 3.6 3.1 2.7  
    500 1000 4.8 4.2 3.6 2.9  
    600 1,200 6 3 5 3 4 12
    750* 1500 7.2 4.2 6.3 3.6 5.4 4.3  
SHA03 3’
(914mm)
375 1125 5.4 4.7 4.1  
    500 1500 7.2 6.3 5.4 4.3  
    600 1800 8.7 5 7.5 4.3 6.5 15.5
    750* 2250 10.8 6.3 9.4 5.4 8.1 6.5  
SHAO4 4’
(1219mm)
375 1500 7.2 6.3 5.4 4.3  
    500 2000 9.6 8.3 7.2 5.8 3.3  
    600 2400 11.5 6.7 10 5.8 8.7 6.9 20
    750* 3000 14.4 8.3 12.5 7.2 10.8 8.6 5 2.9  
SHA05 5’
(1524mm)
375 1875 9 7.8 6.8 5.4 3.1  
    500 2500 12 10.4 9 7.2 4.2  
    600 3000 14.4 8.3 12.5 7.2 10.8 8.6 5 2.9 25.5
    750* 3750 18 10.4 15.6 9 13.5 10.8 6.3 3.6  
SHA06 6’
(1829mm)
375 2250 10.8 9.4 8.1 6.5 3.8  
    500 3000 14.4 12.5 10.8 8.6 5  
    600 3600 17.3 10 15 8.7 13 10.4 6 3.5 30
    750* 4500 21.6 12.5 18.8 10.8 16.2 13 7.5 4.3  
SHA07 7’
(2134mm)
375 2625 12.6 10.9 9.5 7.6 4.4  
    500 3500 16.8 14.6 12.6 10.1 5.8  
    600 4200 20.2 11.7 17.5 10.1 15.2 12.1 7 4 35
    750* 5250 25.2 14.6 21.9 12.6 19 15.1 8.8 5.1  
SHA08 8’
(2438mm)
375 3000 14.4 12.5 10.8 8.6 5  
    500 4000 19.2 16.7 14.4 11.5 6.7  
    600 4800 23.1 13.3 20 11.6 17.3 13.8 8 4.6 40
    750* 6000 28.8 16.7 25 14.5 21.7 17.3 10 5.8  
SHA09 9’
(2743mm)
375 3375 16.2 14.1 12.2 9.7 5.6  
    500 4500 21.6 18.8 16.2 13 7.5  
    600 5400 26 15 22.5 13 19.5 15.6 9 5.2 45
    750* 6750 32.5 18.8 28.1 16.3 24.4 19.5 11.3 6.5  
SHA10 10’
(3048mm)
375 3,750 18 16 14 11 6  
    500 5000 24 20.8 18.1 14.4 8.3  
    600 6000 28.8 16.7 25 14.5 21.7 17.3 10 5.8 50
    750* 7500 36.1 20.8 31.3 18.1 27.1 21.6 12.5 7.2  
*750W Models Bottom Inlet Only.
CATALOG NUMBER DIMENSIONS (W x H x L) SHIP WT.(lbs.)
DBABS1F 35/8" x 6" x 1' 4
DBABS1B    
DBABS2F 35/8" x 6" x 28" 7
DBABS2B    
DBABS3F 35/8" x 6" x 3' 9
DBABS3B    
DBABS4F 35/8" x 6" x 4' 12
DBABS4B    
DBABS5F 35/8" x 6" x 5' 16
DBABS5B    
DBABS6F 35/8" x 6" x 6' 19
DBABS6B    
DBABS7F 35/8" x 6" x 7' 22.5
DBABS7B    
DBABS8F 35/8" x 6" x 8' 24
DBABS8B    
DBABS9F 35/8" x 6" x 9' 27
DBABS9B    
DBABS10F 35/8" x 6" x 10' 30
DBABS10B    
NOTE 1: Blank section grilles are not punched unless requested.
CATALOG NUMBER DESCRIPTION SHIP WT.(lbs.)
DBAECL End Cap - Left 1
DBAECR End Cap - Right  
DBAECLS End Cap w/Screws - Left 1
DBAECRS End Cap w/Screws - Right  
DBAICF Inside Corner-Front In 5
DBAICB Inside Corner-Bottom In 5
DBAOCF Outside Corner-Front In 4
DBAOCB Outside Corner-Bottom In 4
DBA135ICF 135° Inside Corner-Fnt In 5
DBA135ICB 135° Inside Corner-Bot In 5
DBA135OCF 135° Outside Corner-Fnt In 4
DBA135OCB 135° Outside Corner-Bot In 4
DBADESBL Dec. End Section-Bot In, Left 5
DBADESBR Dec. End Section-Bot In, Right 5
DBADESFL Dec. End Section-Fnt In, Left 4
DBADESFR Dec. End Section-Fnt In, Right 4
DBASP Splice Plate 1
DBAFL3 Filler Section 3" 1
DBAFL6 Filler Section 6" 1
DBAFL9 Filler Section 9" 1
DBAFL12 Filler Section 12" 1
DBA-FL18 Filler Section 18" 1.5
DBADRF Receptacle Section-Fnt In 1.5
DBADRB Receptacle Section-Bot In  
DBAPEF Pneu/Ele Sw-Fnt In 2
DBAPEB Pneu/Ele Sw-Bot In  
**PK3S Standard Pedestal 2
**PK3A Architectural Pedestal 2
SO1A Stand-Off Bracket 1
N/A - Not Available.
*Add suffix -P for painted, -C for clear anodized, -B for bronze anodized (excludes PK3S - Black only).
**One pedestal. Two required on units up to 10', three required on units over 10".
Note: For optional built-in controls see page 39.
CATALOG NUMBER DIMENSIONS (W x H x L) SHIP WT.(lbs.)
SHABS1F 53/8" x 7” x 1' 7
SHABS1B 53/8" x 7” x 1' 7
SHABS2F 53/8" x 7” x 28" 11
SHABS2B 53/8" x 7” x 28" 11
SHABS3F 53/8" x 7” x 3' 14
SHABS3B 53/8" x 7” x 3' 14
SHABS4F 53/8" x 7” x 4' 18
SHABS4B 53/8" x 7” x 4' 18
SHABS5F 53/8" x 7” x 5' 22
SHABS5B 53/8" x 7” x 5' 22
SHABS6F 53/8" x 7” x 6' 27
SHABS6B 53/8" x 7” x 6' 27
SHABS7F 53/8" x 7” x 7' 32
SHABS7B 53/8" x 7” x 7' 32
SHABS8F 53/8" x 7” x 8' 37
SHABS8B 53/8" x 7” x 8' 37
SHABS9F 53/8" x 7” x 9' 40
SHABS9B 53/8" x 7” x 9' 40
SHABS10F 53/8" x 7” x 10' 44
SHABS10B 53/8" x 7” x 10' 44
NOTE 1: Blank section grilles are not punched unless requested.
CATALOG NUMBER DESCRIPTION SHIP WT.(lbs.)
SHAECR End Cap - Right  
SHAECLS End Cap w/Screws - Left 1
SHAECRS End Cap w/Screws - Right  
SHAICF Inside Corner-Front In 11
SHAICB Inside Corner-Bottom In 11
SHAOCF Outside Corner-Front In 7
SHAOCB Outside Corner-Bottom In 7
SHA135ICF 135° Inside Corner-Fnt In 11
SHA135ICB 135° Inside Corner-Bot In 11
SHA135OCF 135° Outside Corner-Fnt In 7
SHA135OCB 135° Outside Corner-Bot In 7
SHADESBL Dec. End Section-Bot In, Left 11
SHADESBR Dec. End Section-Bot In, Right 11
SHADESFL Dec. End Section-Fnt In, Left 7
SHADESFR Dec. End Section-Fnt In, Right 7
SHASP Splice Plate 1
SHAFL3 Filler Section 3" 1
SHAFL6 Filler Section 7” 1
SHAFL9 Filler Section 9" 2
SHAFL12 Filler Section 12" 3
SHAFL18 Filler Section 18" 5
SHADRF Receptacle Section-Fnt In  
SHADRB Receptacle Section-Bot In 2
**PK5S Standard Pedestal 2
**PK5A Architectural Pedestal 2
SO1A Stand-Off Bracket 1
N/A - Not Available.
Add suffix -P for painted, -C for clear anodized, -B for bronze anodized (excludes PK5S - Black only).
One pedestal. Two required on units up to 10', three required on units over 10'.
Note: For optional built-in controls see page 39.

 

This product is a custom Made-To-Order (MTO) product.  It is not covered by the Marley Engineered Products Merchandise Return Policy and is non-cancellable, exchangeable, or returnable.