PJ Series - Institutional Electric Convector

  • PJ Series type convector is designed with low operating temperatures and is UL listed.
  • This is a rugged, wall mounted, tamper resistant convection heater designed to provide heat in correctional or rehabilitation institutions where safety is a major concern
  • 140ºF maximum surface temperature in a 70ºF ambient
  • Internal tamper resistant thermostat with 55º to 100ºF range 12 gauge perforated steel, sloped top cover
  • Finished in a neutral grey epoxy paint Internal DPST disconnect switch
See more HeatersSee more MIP products

Additional Information

ORDER NUMBER HEATER VOLTS WATTS (K/W) AMPS SHIP WT. (lbs.)
PJ400 120 400 3.3 40
PJ408 208 400 1.9 40
PJ404 240 400 1.7 40
PJ407 277 400 1.4 40
PJ500 120 500 4.2 45
PJ508 208 500 2.4 45
PJ504 240 500 2.2 45
PJ507 277 500 1.8 45
PJ750 120 750 6.2 55
PJ758 208 750 3.6 55
PJ754 240 750 3.3 55
PJ757 277 750 2.7 55
PJ1000 120 1000 8.3 65
PJ1008 208 1000 4.8 65
PJ1004 240 1000 4.4 65
PJ1007 277 1000 3.6 65
PJ1250 120 1250 10.4 80
PJ1258 208 1250 6 80
PJ1254 240 1250 5.4 80
PJ1257 277 1250 4.5 80
PJ1500 120 1500 12.5 95
PJ1508 208 1500 7.2 95
PJ1504 240 1500 6.5 95
PJ1507 277 1500 5.4 95
PJ2008 208 2000 9.6 105
PJ2004 240 2000 8.8 105
PJ2007 277 2000 7.2 105
Note: These products are Made-to-order and cannot be returned.